EN 10025-6 S960QL Price in Russia 2021

For low alloy high strength steel, the addition of small amounts of V, Ti, Nb, AI and other grain refining elements not only further improves the strength, but also improves the toughness of the steel. In EN 10025-6 S960QL, low alloy high strength steel, rare earth element Re is sometimes added to eliminate harmful impurities in the steel, improve the shape and distribution of inclusions, and weaken its cold brittleness. A small amount of alloying elements has a significant effect on improving the mechanical properties of steel. For example, adding only 1% Mn to Q235 becomes Q345 steel, but its strength increases by nearly 40% to 345 MPa.

The outer diameter of the hot-rolled seamless pipe is generally larger than 32mm, and the wall thickness is 2.5-75mm. The diameter of the cold-rolled seamless pipe can be 6mm, the wall thickness can be 0.25mm, the outer diameter of the thin-walled pipe can be 5mm, and the wall thickness is less than 0.25mm. The size accuracy of the cold-rolled seamless pipe is higher than that of the hot-rolled seamless pipe, EN 10025-6 S960QL.

Land transportation inquiry: (RMB fee) it is required to master the kilometers and towing price of major cities; packing price of each port area; customs clearance fee, commodity inspection fee, and animal and plant inspection fee standard. Key information to be clarified after accepting the consignation of the consignor (generally fax): shipping date, number of packages, box type, box quantity, gross weight and volume.

After extrusion, the EN 10025-6 S960QL tube shall be removed for sizing. The sizing machine uses a cone-shaped bit to rotate into the steel embryo at high speed to drill holes to form steel pipes. The inner diameter of the steel pipe is determined by the outer diameter length of the drill bit of the sizing machine. After sizing, the steel pipe will enter the cooling tower and be cooled by water spray. After cooling, the steel pipe will be straightened. After straightening, the steel pipe is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection.

Tags: