Welcome to BBN High Strength Steels Factory

China 1.8940 steel mild carbon steel

Shipbuilding steel is a kind of steel plate used by shipyards, shipbuilding companies and dockyards to manufacture hulls of cargo and passenger ships, boats, offshore drilling platforms, gateways and other structures and vessels. The company also supply AB AH36 plates and steel sheets 1.8940 steel in coils or cut to length, steel profiles (steel bulb flats, rounds and squares), and round and profiled tubes made from shipbuilding steel grades. Shipbuilding steel is produced under the control of certifying societies, sea and river registers.

The common delivery status of 1.8940 steel, SA516 Gr 70 plate is as follows:
1) SA516 Gr 70 plate quenching: the process of rapid cooling after heating to the temperature above the phase transformation point.
2) SA516 Gr 70 plate normalizing: after heating above the phase transition temperature, it is cooled normally (in air).
3) SA516 Gr 70 plate annealing: heating to above the phase transition temperature, cooling slowly.
4) SA516 Gr 70 plate tempering: after quenching, it is heated to a certain temperature (lower than the quenching temperature), kept warm, and then cooled.

Titanium microalloying is an element of 1.8940 steel strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in 1.8940 steel tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.

Both parties shall confirm the 1.8940 steel material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the 1.8940 steel steel plant.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels