EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1

Description: EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 are European standard special alloy structural steel, and they are usually supplied in quenched and...

E-mail: [email protected]

Chat Online Leave a Message

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 Description

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 are European standard special alloy structural steel, and they are usually supplied in quenched and tempered condition. In the steel grades, S means structural steel, 960 means yield value, unit MPa, Q means delivery condition. The minimum nominal thickness of S960 series steel plates is 3mm.

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 chemical composition of heat analysis:

Grade	C	Si	Mn	P	S	N	B	Cr	Cu	Mo	Nb	Ni	Ti	V	Zr
S960Q	0.20	0.80	1.70	0.025	0.015	0.015	0.005	1.50	0.50	0.70	0.06	4.0	0.05	0.12	0.15
S960QL, S960QL1				0.020	0.010

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 chemical composition of product analysis:

Grade	C	Si	Mn	P	S	N	B	Cr	Cu	Mo	Nb	Ni	Ti	V	Zr
S960Q	0.22	0.86	1.8	0.03	0.017	0.016	0.006	1.6	0.55	0.74	0.07	4.1	0.07	0.14	0.17
S960QL, S960QL1				0.025	0.012

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 mechanical properties - tensile test properties at room temperature:

EN10025-6	Steel number	Min. Yield Strength (MPa)				Tensile Strength (MPa)				Min. Elongation
		≥3 ≤50	>50 ≤100	>100 ≤125	>125 ≤200	≥3 ≤50	>50 ≤100	>100 ≤125	>125 ≤200
S960Q	1.8941	960	850	850	-	980 to 1150	900 to 1100	900 to 1100	-	10
S960QL	1.8933
S960QL1	1.8934

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 mechanical properties - impact energy on test pieces:

EN 10025-6	Min. impact energy (J) at test temperature (℃)
Grade	0		-20		-40		-60
Grade	Longitudinal	Transverse	Longitudinal	Transverse	Longitudinal	Transverse	Longitudinal	Transverse
S960Q	40	30	30	27	-	-	-	-
S960QL	50	35	40	30	30	27	-	-
S960QL1	60	40	50	35	40	30	30	27

EN 10025-6 high strength steel plates S960Q, S960QL, S960QL1 are widely used in the manufacture of bottom plates of mining truck that is more than 100 tons, pumping machinery, excavators, truck cranes, crawler cranes, coal mine hydraulic supports, etc.

Pre: EN 10025-6 high strength steel plates S890Q, S890QL, S890QL1

Next: Back to list