1.8916 EN 10025-6 high strength steel exported to UAE

We can cut the large steel plates 1.8916 EN 10025-6 high strength steel by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the 1.8916 EN 10025-6 high strength steel product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

BBN steel 1.8916 EN 10025-6 high strength steel 15mm to 35mm thick size: 15*2120*5620, 17.5*2320*13000, 18*2450*5500, 20*3000*5000, 19*2580*4700, 19.5*1970*4000, 20*1600*7740, 20.5*2370*7000, 21*2650*7500, 21*1920*8220, 22*1380*7650, 22*1800*8000, 22.5*1680*8450, 23*3000*11980, 23.5*2080*8100, 24*1560*6200, 25.5*2330*8300, 26*3010*8100, 26.5*2000*7000, 27*2550*6800, 27.5*2700*5500, 29*2550*9000, 29*2870*12000, 32*3300*6000, 33*2340*6700, 34*2120*6100, 35*1300*4100.

According to the data of the National Bureau of statistics, from January to February, the output of pig iron, crude steel and steel (excluding repetitive materials) were 132.34 million tons, 154.7 million tons and 167.13 million tons, respectively, up 3.1%, 3.1% and 3.4% year on year; the daily output of 1.8916 EN 10025-6 high strength steel, crude steel was 2.5783 million tons, down 5.15% year on year.

Generally speaking, rolled plates are easier to handle in a high temperature environment, and the heat treatment of 1.8916 EN 10025-6 high strength steel, rolled plates is also very common. Hot rolling can not only greatly reduce energy consumption and save costs, but also improve the processing performance of metals and alloys, that is, the coarse grains in the as-cast state are broken, the cracks are healed significantly, and the processing performance of the alloy is improved.

Tags: EN 10025-6 high strength steel