8*2400*10000 S460QL1 material specification MS Mild Steel Plates

The company adheres to the people-oriented concept and takes "learning, sharing, gratitude, integrity, respect and responsibility" as the enterprise values. Advanced equipment, scientific standardized management, strict quality assurance system and high-quality team are the core competitiveness of the company. The company will continue to provide customers with S460QL1 material specification high-quality, timely and perfect steel products and services under the guidance of the mission of "striving for perfection to meet customer needs".

The difference between S460QL1 material specification, Q420D steel and Q460D steel: Q420D steel has good mechanical properties and weldability, good cold and hot workability. Q420D steel is mainly used for manufacturing mining machinery, heavy vehicles, ships, bridges, medium and high pressure boilers, vessels and other large welding and structural parts. S460QL1 material specification, Q460D steel has high strength, good plasticity and toughness, good weldability and good cold and hot workability. Q460D steel is mainly used for manufacturing engineering machinery components, such as mining machinery, forklift truck, transport vehicle, bridge, medium and high pressure boiler and other large-scale welding structural parts.

The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with S460QL1 material specification, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.

The deoxidization process of Q345R boiler vessel plate if the type and amount of deoxidizer are controlled to make a certain amount of oxygen remain in the S460QL1 material specification steel, when sufficient amount of strong oxidant is added to make the steel deoxidize well, the co bubble will escape during the solidification process and generate boiling phenomenon, no co bubble will be generated during the solidification of the S460QL1 material specification steel, the steel used for the pressure vessel of the killed steel is called the killed steel, this kind of steel is called the boiling steel.

S460QL1 material specification, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.