EN 10025-6 S890QL top manufacturer in Austria

EN 10025-6 S890QL 1000 tons in warehouse
5.5*3000*5000, 7*2920*8780, 7*1850*6000, 7*2920*13000, 5*2570*8000, 6*2750*9600, 5.5*2450*6500, 6*1850*7510, 6*1750*8500, 7*2560*8600, 8*1620*7870, 8*1500*4850, 8*3040*4000, 7*2920*8780, 10*1500*6850, 5*2570*8150, 6*2310*8500, 8*1700*6300, 5*2490*8200, 8*2100*7800, 10*3000*4750, 10*1750*6000, 5*2490*9000, 8*2090*6640.

EN 10025-6 S890QL, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of EN 10025-6 S890QL, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.

What are the characteristics of medium and thick plate, EN 10025-6 S890QL? First, the performance of shock resistance and vibration is very good, so the application of medium and thick plates in buildings and bridges can greatly improve the safety. Second, the bearing capacity of medium and thick plate, EN 10025-6 S890QL is good, the performance is excellent. The bridge, the automobile girder steel plate, and buildings have strict load-bearing requirements, and it is easy to cause accidents if the steel materials not meet the requirements, so the selection of steel is more stringent.

Tags: