en S460QL1 equivalent inventory decreased

Our company's en S460QL1 equivalent power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the en S460QL1 equivalent utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

The yield strength of AH36, DH36, en S460QL1 equivalent, EH36, and FH36 Steel for high-strength hull structure is not less than 355MPa, and the tensile strength is 490 ~ 620MPa. The letter A, D, E, and F indicate the impact toughness that they can achieve at 0°C, -20°C, -40°C and -60°C respectively. The yield strength of Grade AH40, DH40, EH40, FH40 hull structural steel is not less than 390MPa, the tensile strength is 510 ~ 660MPa.

en S460QL1 equivalent, low alloy high strength steel has good weldability. Welding is the most common method to construct engineering structure, so the steel used in engineering structure requires good welding performance. Low alloy high strength steel has low carbon content, low alloy element content and good plasticity, so it is not easy to produce quenching structure and crack in the weld area, and the addition of Ti, Nb, V can also inhibit the grain growth in the weld area. Therefore, most of the low alloy high strength steels have excellent welding performance and no heat treatment is required after welding.

The en S460QL1 equivalent stainless steel 2250 mm wide coil mill has advantages such as adapting to difficult-to-deform steel grades. The Liuzhou Iron and Steel Hot Rolling Leveler project designed and supplied by MCC South is equipped with the latest straightening and leveling process (LTP technology) developed by MCC South. The en S460QL1 equivalent performance stability, cost and various consumption indicators have reached the international advanced level.

42CrMo alloy steel en S460QL1 equivalent: low temperature tempering welding performance thermal processing
The heating temperature is 1150 ~1200°C, the starting temperature is 1130 ~1180°C, the ending temperature is> 850°C, and when φ> 50mm, slow cooling. The normalizing temperature is 850~900°C, and the furnace is air cooled. High temperature tempering: Tempering temperature is 680~700°C, and it is air-cooled from the furnace.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.