Grade S690Q EN 10025-6 high strength steel machinability

Wear resistant steel plate is a kind of special plate product specially used under the condition of large area wear. At present, the commonly S690Q EN 10025-6 high strength steel used wear-resistant steel plate is a plate product made by overlaying a certain thickness of hard and wear-resistant alloy wear-resistant layer on the surface of ordinary low carbon steel or low alloy steel with good toughness and plasticity. The wear-resistant steel plate S690Q EN 10025-6 high strength steel consists of two parts: carbon steel plate and alloy wear-resistant layer.

40Cr steel belongs to alloy structural steel. S690Q EN 10025-6 high strength steel, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.

X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This S690Q EN 10025-6 high strength steel method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.

The S690Q EN 10025-6 high strength steel pressure vessel steel plates are our featured products. We have supplied pressure vessel steel plates to tank manufactures, boiler makers, power plants and so on customers all over the world. We have online service for you at any time, welcome to contact and learn more information about pressure vessel steel, such as S690Q EN 10025-6 high strength steel ASTM A537 class 1 equivalent, 16Mo3 datasheet, Q245R material properties, Q345R material specification, P355GH properties, pressure vessel steel price, etc.

The results of adopting two-level S690Q EN 10025-6 high strength steel service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and S690Q EN 10025-6 high strength steel after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.