Welcome to BBN High Strength Steels Factory
Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of S690QL material number circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives. Through measures such as energy saving, technological innovation and S690QL material number management strengthening, the energy saving target of annual reduction of added value energy consumption by 7%. It has made great contribution to energy saving of over completion.
S690QL material number, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of S690QL material number, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.
The advantages of S690QL material number, seamless steel pipe are high pressure resistance, good toughness, long pipe section and few joints. It is widely used and the rolling technology of domestic steel mills is also very mature. Compared with round steel, the weight of seamless steel pipe is lighter under the same strength. Seamless steel pipe manufacturing ring parts, can improve the utilization of materials, simplify the manufacturing process, save materials and processing time. Compared with the welded pipe, there is no weld on the outer surface of seamless steel pipe, and it has good compression resistance.
In actual processing applications, the processing S690QL material number thickness of flame cutting ranges from 6 to 200 mm, and the S690QL material number cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting S690QL material number with a certain thickness above 10mm.
S690QL material number, Chinese material Q235B is one of the most widely used carbon steel in the world. Some like to compare its strength with other equivalent steel grades. We need to take care that the Q235B steel strength varies with thickness. For the min. yield strength of Q235B steel plate: it is 235Mpa if thickness ≤16mm, 225 Mpa for thickness 16-40mm, 215 Mpa for thickness 40-60mm, 205 Mpa for thickness 60-100mm, 195 Mpa for thickness 100-150mm, 185 Mpa for thickness over 150mm. The tensile strength of Q235B steel plate is 375-500 Mpa.
Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.
Leave a Message