S500QL stahl equivalent ASME steel

Non-secondary S500QL stahl product hot selling: 26*1500*9950, 23.5*2040*8100, 24*1500*6700, 23.5*1640*6550, 29*2140*7700, 30*1500*6000, 24*2000*9550, 26.5*2000*7000, 26*1600*6000, 32*1570*6000, 32.5*1560*6250, 25.5*1300*6000, 27*2550*6800, 27.5*2700*5500, 33*2340*6700, 34*1300*4000, 25.5*1740*8700, 29*2550*9000, 29*2870*12000, 26*1300*8100, 32.5*3050*6500.

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of S500QL stahl, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

In recent years, in line with the development trend of iron and S500QL stahl steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc., which S500QL stahl are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields. Meanwhile, we also provide deep processing for the steel materials.

In actual processing applications, the processing S500QL stahl thickness of flame cutting ranges from 6 to 200 mm, and the S500QL stahl cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting S500QL stahl with a certain thickness above 10mm.

Tags: