Welcome to BBN High Strength Steels Factory

Shaped carbon steel EN 10025-6 equivalent material

Our quality control department will do inspection for details of the steel materials EN 10025-6 equivalent material before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

ASTM A441, used in low-tolerance, state-of-the-art structures, such as towers and large telescopes, EN 10025-6 equivalent material is a high-strength structural grade with a yield strength of 40,000 to 50,000 psi and an allowable bending stress of 24,000 to 30,000 psi.

EN 10025-6 equivalent material Weldability refers to the performance of the weld joint with the expected quality requirements obtained by common welding methods under specific structure and process conditions. Weldability is generally judged by the crack sensitivity and the change of mechanical properties of weld zone. The ability of steel materials to withstand bending without cracking at room temperature is called cold bending. The greater the bending capacity before crack, the better the cold bending performance of the steel material.

EN 10025-6 equivalent material, No. 20 steel belongs to high-quality carbon steel.No. 20 steel means steel with an average carbon content of 0.20%;The thermal conductivity of No. 20 steel at 315℃ is 48 W/m℃;No. 20 steel is generally not quenched, the general treatment method is carburizing or normalizing;The yield strength of No. 20 steel is not less than 250MPa;The tensile strength of No. 20 steel is not less than 420MPa;Elongation of No. 20 steel is not less than 25%;The reduction of area is not less than 55%;The density of EN 10025-6 equivalent material and No. 20 steel is 7.85kg/cm3

The predecessor of Ningbo port is Ningbo Port Authority. Ningbo port consists of Beilun port, Zhenhai port, Ningbo port, Daxie port and Chuanshan port. It is a multi-functional and comprehensive modern deep-water port integrating inland river port, estuary port and seaport.

Welcome customers to visit our company, we specialize in steel products, adhere to the EN 10025-6 equivalent material quality first standard, and do not forget to provide customers with the best quality products and services. Our product quality office is the best, and our EN 10025-6 equivalent material price is also very advantageous. Welcome to purchase steel products from our company.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels