Welcome to BBN High Strength Steels Factory
Our company has sales department, technology department, quality inspection department, after-sales department, logistics department. Each department has professional knowledge and high professional quality, put customers first, think about the interests of customers, actively communicate with customers and solve problems smoothly.
Ordinary S460QL chemical composition carbon steel mainly refers to the steel whose mechanical properties depend on the carbon content in the steel, and generally does not add a lot of alloy elements. Ordinary carbon steel is the abbreviation of ordinary carbon structural steel. Carbon content is less than 0.38%, and less than 0.25% is the most commonly used. It belongs to low carbon steel. In the Chinese standard, each metal grade indicates the low yield point of the steel when the thickness is less than 16mm. Compared with high-quality carbon steel, the limitation of carbon content, performance range, phosphorus, sulfur and other residual elements is wider for ordinary carbon steel.
During the welding of hardfacing wear-resistant steel plate, S460QL chemical composition, the welding shall be carried out in strict accordance with the drawing, welding process and relevant standards. Follow the welding sequence of first welding the base layer, then welding the transition layer, and then welding the multiple layer. In order to prevent adhesion of welding spatter, anti spatter coating should be applied within 100 mm on both sides of groove of stainless steel clad plate before welding.
Chemical elements of 42SiMn steel: C: 0.39-0.45, Si: 1.10-1.40, Mn: 1.10-1.40. Mechanical properties of 42SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 40; impact energy: 47J. 42SiMn steel belongs to alloy quenched and tempered steel with good properties, high strength, wear resistance and hardenability. Under certain conditions, the strength, wear resistance and hot working performance of 42SiMn steel are better than 40Cr steel, S460QL chemical composition, and can be used instead of 40CrNi steel.
The company uses outsourced logistics operations. Our cooperated professional third-party logistics providers use the advantages of large-scale production and cost advantages to achieve cost savings by increasing the utilization of resources in each link, so that we can benefit from the separation of cost structure. Therefore, we can also provide customers with better, faster and more efficient cargo transportation, delivery, and lower freight costs.
For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate S460QL chemical composition EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.
Leave a Message