Welcome to BBN High Strength Steels Factory
ASTM a992 steel 1.8986 EN 10025-6 high strength steel is recognized as the most suitable steel for wide flange beam in the world. It contains a variety of alloy elements, such as vanadium, niobium, copper, nickel, chromium and molybdenum, which greatly improve 1.8986 EN 10025-6 high strength steel its strength and other properties. For example, the mechanical properties are much better than the tensile strength 65ksi and yield strength 65ksi of a572-50 and A36. Therefore, a992 wide flange beam (H beam) generally replaces a572-50.
The company covers an area of 15,000 square meters and the plant construction area is 10,000 square meters. We have introduced more than 50 sets of advanced 1.8986 EN 10025-6 high strength steel production equipment, auxiliary equipment and testing equipment at home and abroad, more than 260 employees, more than 20 middle and senior management staff, more than 10 professional and technical personnel, annual production capacity of 100,000 tons. Main products: flat steel, 1.8986 EN 10025-6 high strength steel steel pipe, steel plate, section steel, steel structure processing parts, etc. We also accept incoming materials and annealing processing.
Steel plate 1.8986 EN 10025-6 high strength steel cutting, according to different classification standards, there are different specific types. If it is divided by cutting temperature, it can be divided into cold cutting and hot cutting. One of the cold cutting, there are water jet cutting and abrasive cutting and so on, thermal cutting is flame cutting, plasma cutting and laser cutting. In addition, we also need to know that the high-grade thick 1.8986 EN 10025-6 high strength steel steel plate can be cut by flame, and its cutting is as simple as that of ordinary low-carbon and low-alloy steel, but we need to pay attention to it.
1.8986 EN 10025-6 high strength steel, Q345B low alloy steel plate composition: 1) Low carbon: Due to the high requirements for toughness, weldability and cold forming properties, its carbon content does not exceed 0.20%; 2) Add manganese-based alloying elements; 3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the Q345B steel, which is conducive to obtaining fine ferrite grains and improving the strength and toughness of the steel; In addition, adding a small amount of copper (≤0.4%) and phosphorus (about 0.1%) can improve the corrosion resistance. Adding a small amount of rare earth elements can desulfurize and degas, purify steel, improve toughness and process performance.
We have a professional after-sales department to collect all information related to customers, so as to make relevant treatment in time according to the information, and file it; guide the user's product use methods and precautions; coordinate with the sales department, visit customers regularly, understand the customer's use and new requirements, and make a customer visit record; When communicating with customers, they should be enthusiastic and careful to understand the situation of product problems and put forward solutions
Leave a Message