Welcome to BBN High Strength Steels Factory

Anti-dumping duties on the imported S690QL1 specification

Since its establishment, the company has always adhered to the enterprise spirit of "solid feet and lofty ideals, dare to create and take responsibility, and dedicate to work". After years of careful management, the company has achieved the duble improvement of capital strength and scale expansion, gained wide recognition and general praise from all walks of life, further realized specialized and large-scale operation and optimized allocation of resources, and effectively improved the overall strength, competitiveness and anti risk ability of the company.

The steel such as S690QL1 specification delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

S690QL1 specification, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel.
Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015.
The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

In 2010, the 87th session of the International Maritime Organization (IMO) Maritime Committee passed the "Performance Standards for Alternative Anticorrosion Measures for Crude Oil Cargo Tanks". It is mandatory that the cargo tanks of large oil tankers above 5,000 dwt need to be protected or used The construction of corrosion-resistant steel promotes the rapid development of the research and application of corrosion-resistant steel for oil tankers in China. At present, the performance of domestic corrosion-resistant steel has reached the world's leading level and can meet the requirements of large-scale applications.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels