Welcome to BBN High Strength Steels Factory

BBN has the S690QL1 steel mechanical properties stocks and size list

Composition characteristics of low alloy structural steel, S690QL1 steel mechanical properties: (1) Low carbon: the carbon content of low alloy structural steel is less than 0.20% due to the high requirements of toughness, weldability and cold formability. (2) The alloy elements such as manganese are added. (3) The addition of Nb, Ti or V and other auxiliary elements: a small amount of Nb, Ti or V forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of low alloy structural steel. In addition, adding a small amount of copper (≤ 0.4%) and phosphorus (about 0.1%) can improve the corrosion resistance. The addition of a small amount of rare earth elements can remove sulfur and gas, purify the steel, and improve the toughness and process performance of low alloy structural steel.

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel S690QL1 steel mechanical properties can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.

S690QL1 steel mechanical properties and so on steel structure engineering steel has good plasticity, which can make the structure have obvious deformation before being destroyed, so as to avoid brittle failure of structure. The good plasticity of steel can adjust the local peak stress to redistribute the stress, and improve the ductility of components, so as to improve the seismic capacity of the structure. The impact toughness of S690QL1 steel mechanical properties and so on steel structure engineering steel is good, which can improve the ability of resisting dynamic load and avoid the occurrence of cracks and brittle fracture.

We have huge stocks for carbon steel plates, high strength low alloy steel materials, weather resistant steel sheets, wear resistant steel plates, boiler plates, pipeline steel, etc. Those stocks can be delivered within 10 days after deposit. We update S690QL1 steel mechanical properties stock list regularly. But the stock changes quickly. It needs to check with warehouse specially when you have urgent needs. Welcome to contact us and book steel materials stocks.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels