Cause analysis of red oxide iron on EN 10025-6 high strength steel 1.8926 surface

VLE460 steel plate grade analysis: "VL" stands for the abbreviation of "DNVGL", which is the standard certified by the two classification societies of DNV (Norway) and GL (Germany). VL E460 hull steel characteristics: good welding and other properties. It is suitable for repairing ships and main structures of naval vessels. Naval steel is required to have higher strength, better toughness, blast resistance and resistance to deep water collapse.

Alloy elements have the most significant strengthening effect on steel in quenched and tempered state. The primary purpose of adding alloying elements to steel is to improve the hardenability of steel and to ensure that martensite is easily obtained during quenching. The second is to improve the tempering stability of the steel to keep the martensite at a higher temperature, so that the carbides precipitated during the tempering of the quenched steel are finer, uniform and stable. In this way, under the same conditions, alloy steel has higher strength than carbon steel, EN 10025-6 high strength steel 1.8926.

Cold rolled EN 10025-6 high strength steel 1.8926 steel sheet can be produced by two high mill, four high reversing mill, multi high reversing mill and tandem cold mill. Although there are still only two work rolls in four high and multi high rolling mills, each work roll is supported by one or more large diameter backup rolls, which can prevent deflection of work roll. As a result, wide and thinner EN 10025-6 high strength steel 1.8926 steel plates can be produced. For example, 20 high mill can produce as thin as 0. 001 mm sheet, but the two high mill can only produce as thin as 0. 35mm sheet

After sales service support personnel pay attention to commitment in their work. In the process of people to people communication, mutual trust is an important factor for the long-term and stable communication. After sales service personnel must do what they say in the process of communication with customers.

Tags: