Cause analysis of slag hanging in EN 10025-6 high strength steel 1.8906 cutting process

The company was established in 2000, covering an area of more than 4,500 acres. It has fixed assets of 200 million yuan, and employs more than 1,200 people. It has now formed coking, sintering, white ash, pellets, ironmaking, EN 10025-6 high strength steel 1.8906 steelmaking, steel rolling, oxygen production, gas and waste heat The complete circular economy industrial chain including power generation, comprehensive utilization of slag, soot and dust treatment, sewage treatment and recycling, etc. It mainly produces hot-rolled steel plates and EN 10025-6 high strength steel 1.8906 carbon structural steels, high-quality carbon structural steels, low-alloy high-strength steels, medium and wide-band steels for cold-rolled stamping, and hot-rolled coils.

Smelting process of EN 10025-6 high strength steel 1.8906, container plate SPA-H weather-resistant steel: The molten iron for smelting SPA-H steel must be pretreated by molten iron desulfurization. Before entering the converter, the sulfur content of the molten iron is ≤0.010%, and the slag on the surface of the molten iron is cleaned. Nickel plates, copper particles or nickel-copper alloys are added to the converter with scrap steel. The carbon content of the converter smelting end is required to be less than 0.06% to prevent the molten steel from being oxidized.

16MnDR steel plate is suitable for low temperature pressure vessels manufacturing. Grade 16Mn- indicates that the content of manganese (Mn) in the steel plate is relatively high, about 1% -1.6%, D- indicates low temperature, R- indicates pressure vessel. (Normally, when the content of a certain chemical element in steel is high, it needs to be marked in the material, for example, 1.6% manganese is written as 16Mn; certain elements such as Cr and Mo are higher, written as Cr1, Mo1, Such as 12Cr2Mo1R.) The normal delivery status is normalized delivery (Normalized).

EN 10025-6 high strength steel 1.8906, API 5L X60 steel plate is one mainly of Steel for large diameter pipes, API-X60 steel for the manufacture of buried pipelines for transporting natural gas can succumb to severe degradation due to corrosion by the soil through. The types of corrosion of steel that can be produced are often general corrosion and pitting.

10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. EN 10025-6 high strength steel 1.8906, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.

If you want to get the ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel price, please do not hesitate to contact us. Any need in EN 10025-6 high strength steel 1.8906 ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us

After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.