China EN 10025-6 high strength steel 1.8934 mild carbon steel

A514 grade R high strength structural steel chemical composition (melting analysis)%C: 0.15-0.20, Si: 0.20-0.35, Mn: 0.85-1.15, P max.: 0.035, S max.: 0.035, B max.: 0.005, Cr: 0.40-0.65, Ni: 0.90-1.10, Mo: 0.15-0.25, V: 0.03-0.08The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with EN 10025-6 high strength steel 1.8934 ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

In March, the daily output of key iron and steel enterprises decreased on a month on month basis. In terms of enterprise inventory, in late March, the key statistics showed that the EN 10025-6 high strength steel 1.8934 steel inventory of iron and steel enterprises was 18.067 million tons, a decrease of 3.342 million tons or 15.6% compared with the highest inventory in early March, and an increase of 8.534 million tons or 89.5% compared with the beginning of the year.

In the first quarter, EN 10025-6 high strength steel 1.8934, crude steel output in Asia amounted to 315.15 million mt, falling by 0.3 percent, with 234.45 million mt produced by China, up 1.2 percent, 24.36 million mt produced by Japan, decreasing by 2.4 percent, 27.5 million mt produced by India, falling by 5.3 percent, and 16.94 million mt produced by South Korea, down by 4.8 percent - with all comparisons on year-on-year basis.

Tags: