EN 10025-6 equivalent material suppliers near me

BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of EN 10025-6 equivalent material steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main EN 10025-6 equivalent material production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.

30CrNi3MoV (675) high-strength steel is a new type of high-strength steel newly developed and put into use in China. It is a steel plate for armored vehicles. 30CrNi3MoV steel is developed by V microalloying on the basis of the original Cr-Ni-Mo series low-alloy ultra-high-strength steel, and appropriately adjusting the content of other alloying elements. The milling performance of 30CrNi3MoV steel is poor.

If a destructive accident occurs during the use of the boiler, it will cause serious losses. Therefore, other than some common strengths with EN 10025-6 equivalent material, the boiler steel plate must have good physical properties, mechanical properties and workability, and be strictly specified in the technical terms of the material standard to meet its safety in use. High temperature (above creep temperature) boiler steel plates are generally low-alloy heat-resistant steels, such as chromium molybdenum steel, chromium molybdenum vanadium steel, chromium molybdenum tungsten steel, etc.

"Our mill has three production lines:1).2500mm production line (Width: 1600-2300mm, EN 10025-6 equivalent material Thickness: 6-30mm, Annual capacity: 1,600,000 Tons; 2).3500mm production line (Width: 2000-3050mm, Thickness: 10-80mm, Annual capacity: 2,000,000 Tons; 3).4300mm production line (Width: 1500-4100mm, Thickness: 6-300mm, Annual capacity: 1,800,000 Tons; The weight of each ingot can reach EN 10025-6 equivalent material 44 tons, which is at the leading level in China. In addition, we have a 1700mm hot-rolled coil production line (width range: 900-1550mm, thickness range: 1.2-25.4mm, annual EN 10025-6 equivalent material production capacity: 3.5 million tons."

20# seamless steel pipe chemical composition: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25. 20# seamless steel pipe mechanical properties: recommended heat treatment temperature: 910℃, tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%, impact energy is not required. 20# seamless steel pipe hardness is higher than 10# seamless steel pipe. EN 10025-6 equivalent material, 20# seamless steel pipe has good weldability, no temper brittleness, and its machinability can be improved by water quenching. 20# seamless steel pipe can be used to make welded components, as well as parts with small load after forging, hot stamping and cutting.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.