EN 10025-6 high strength steel 1.8924 Carbon Steel Supplier

A514 Gr A structural steel plates are mainly used in cranes or large heavy-load machines. ASTM A514 steel offers high strength with weldable, machinable properties.
Quenched and tempered for increased strength.
Available in eight grades: B, S, H, Q, E, F, A and P.
Available in heavy plate thicknesses (3-inches or greater).
Suitable in lower temperatures. Charpy impact test results for specific climates available.

Vanadium is a weak deoxidizer. Adding vanadium into EN 10025-6 high strength steel 1.8924 steel can reduce the adverse effects of carbon and nitrogen, effectively improve the strength, but sometimes also increase the tendency of welding hardening, vanadium is also a commonly used trace alloy element.

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.

Tags: