EN 10025 S500QL1 high strength steel professional supplier in China

We are world class steel EN 10025 S500QL1 high strength steel materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for EN 10025 S500QL1 high strength steel quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.

BBN STEEL supply EN 10025 S500QL1 high strength steel plate specifications range: thickness 8-650mm, width 1500-4020mm, length 4000mm-17000mm, single weight maximum 30.00 tons. Various special specification sheets can be rolled according to customer requirements. Types of steel products: carbon structural steel pipes, low-alloy high-strength steel sheet, steel angles for bridges, steel section for building structures, steel plates for shipbuilding and offshore platforms, steel for boilers and pressure vessels and alloy structures.

Compared with EN 10025 S500QL1 high strength steel, boiler steel plates should have the following properties: (1) High medium temperature strength: low and medium pressure boiler drums use steel with a lower yield point, high pressure boilers use steel with a high yield point. (2) Good plasticity, impact toughness, cold bending and welding performance. (3) The notch sensitivity is small, that is, the sensitivity to the stress concentration caused by the opening of the steel plate surface and the welding of the pipe head is small.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the EN 10025 S500QL1 high strength steel rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of EN 10025 S500QL1 high strength steel steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

A335 P22 steel pipe belongs to ferrite alloy steel nominal pipe for high temperature use. Chemical composition of A335 P22 steel pipe: C 0.10-0.20, Mn 0.30-0.80, P ≤ 0.025, S ≤ 0.025, Si 0.10-0.50, Mo 0.44-0.65. Mechanical properties of A335 P22 steel pipe: tensile strength 415mpa, yield strength 205 MPa. EN 10025 S500QL1 high strength steel, A335 P22 steel pipe is characterized by good process performance, less sensitivity to the heating temperature of heat treatment, good welding performance, good plasticity, and low strength, especially the high temperature rupture strength is lower than 12Cr1MoV steel. When used at the same temperature and stress, its wall thickness is about 30% thicker than 12Cr1MoV Steel.

The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.