Export 20mm EN 10025-6 S550QL high strength steel high quality

The steel grades EN 10025-6 S550QL high strength steel of thick steel plate are basically the same as those of thin steel plate. In terms of steel types, in addition to the bridge steel plate, boiler steel plate, automobile manufacturing steel plate, pressure vessel steel plate and multi-layer high-pressure vessel steel plate, some kinds of EN 10025-6 S550QL high strength steel steel plates, such as automobile girder steel plate (2.5-10 mm thick), checkered steel plate (2.5-8 mm thick), stainless steel plate, heat-resistant steel plate, etc., are crossed with the thin plate.

The purpose of complete annealing of EN 10025-6 S550QL high strength steel, wear-resistant plate is to improve the bad structure, such as coarse grain, widmanstatten structure (coarse ferrite with directional growth along with coarse grain) or banded structure caused by high temperature during hot forging, hot rolling, welding or casting of steel plate, so as to refine grain, improve mechanical properties, and reduce stress and hardness.

Since the welding process is often used in the fabrication and processing of steel structures, it is very important for low-alloy high-strength steels of such purpose to be welded using the arc welding process that is widely used in thin thickness plates and steel strips. Yes, the welding seam of the steel structure should have the required strength and toughness, so as to withstand the most unfavorable conditions for the intended use. At present, the development of EN 10025-6 S550QL high strength steel, low-alloy high-strength steels is carried out simultaneously with the development of various welding processes. Most low-alloy high-strength steels can be welded well.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Tags: