Grade EN 10025-6 high strength steel S550QL application

EN 10025-6 high strength steel S550QL, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of EN 10025-6 high strength steel S550QL, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.

The sulfur element (S element) comes from the ore and fuel coke of steelmaking. It is a harmful element in EN 10025-6 high strength steel S550QL etc. steel. Sulfur exists in steel in the form of iron sulfide (FeS). FeS and Fe form a low melting point (985℃) compound. The hot working temperature of steel is generally above 1150 - 1200℃, so when the steel is hot working, the premature melting of FeS compound causes the workpiece to crack, which is called "hot brittleness". It reduces ductility and toughness of steel and causes cracks during forging and rolling. Sulfur is also detrimental to welding performance and reduces corrosion resistance.

Firmly establish the "people-oriented, safe development" concept, strictly follow the safety production policy of "safety first, prevention first, comprehensive management", strengthen and improve the management and supervision of safety production in an all-round way, and strive to improve the controllability of safety management And effectiveness, cultivate safety culture, improve long-term safety production mechanism, and build a harmonious BEBON.

Steel plate EN 10025-6 high strength steel S550QL cutting, according to different classification standards, there are different specific types. If it is divided by cutting temperature, it can be divided into cold cutting and hot cutting. One of the cold cutting, there are water jet cutting and abrasive cutting and so on, thermal cutting is flame cutting, plasma cutting and laser cutting. In addition, we also need to know that the high-grade thick EN 10025-6 high strength steel S550QL steel plate can be cut by flame, and its cutting is as simple as that of ordinary low-carbon and low-alloy steel, but we need to pay attention to it.