Welcome to BBN High Strength Steels Factory
Delivery status: SA537Gr1, normalizing;SA537Gr2, quenching and tempering, the tempering temperature should not be lower than 595℃;SA537Gr3, quenching and tempering, the tempering temperature should not be lower than 620℃.
Corrosion resistance of stainless steel mainly owes to the formation of a very thin, adhesive and translucent chromium oxide film on the surface of stainless steel. Once the film is damaged, the chromium in the stainless steel will react with oxygen in the atmosphere to restore the film quickly. At the same time, the mechanical damage can also generate a protective film quickly to prevent the EN10025 S690QL steel, stainless steel from corrosion.
During the welding of hardfacing wear-resistant steel plate, EN10025 S690QL steel, the welding shall be carried out in strict accordance with the drawing, welding process and relevant standards. Follow the welding sequence of first welding the base layer, then welding the transition layer, and then welding the multiple layer. In order to prevent adhesion of welding spatter, anti spatter coating should be applied within 100 mm on both sides of groove of stainless steel clad plate before welding.
The company's after-sales service tenet is "customer first, timely guarantee, enthusiastic service and effective work". In order to establish a set of perfect after-sales service system and strict management system, so that the after-sales service can be effectively guaranteed. The company has set up after-sales service department to ensure timely, unique and effective response to every user's request, coordinate internal resources internally, and put an end to all evasion and delay.
Leave a Message