Hot Rolled EN 10025-6 S690QL1 high strength steel Pressure Vessel Plate

Our company is a large EN 10025-6 S690QL1 high strength steel steel enterprise integrating steel plate production, sales and processing. It is a first-class agent of Shanxi Taigang, Shanghai Baosteel, Jiugang, Xi'an Huaxin, Taishan steel, Dongfang special EN 10025-6 S690QL1 high strength steel steel and southwest special steel. It is a special dealer of famous steel plants in China, such as Columbus, NAS, acerinox, Outokumpu, Arcelor, nipponmetalindustry, nipponyakinkogyo, NSC, etc.

S50C steel plate is a high-quality high-quality medium carbon steel. S stands for steel, which means iron, and 50 stands for carbon content of 0.50%. C represents carbon steel, which means that S50C is a carbon steel with a carbon content of 0.50%.
Mechanical properties of S50C steel plate:
Tensile strength σb (MPa): ≥630 (64); Yield strength σs (MPa): ≥375 (38); Elongation δ5 (%): ≥14; Reduction of area ψ (%): ≥40; Impact Work Akv (J): ≥31(4); Impact toughness value αkv (J/cm2): ≥39(4)
Hardness: unheated, ≤241HB; annealed steel, ≤207HB

The main advantage of weather resistant steel plate is its weathering ability. When exposed to the atmosphere, the weather resistant steel plate will form a anti-corrosion film on the surface, and prevent further corrosion to the steel EN 10025-6 S690QL1 high strength steel. Thus the weather resistant steel plate almost needs no paint treatment, which is the important measure for carbon steel plates to avoid going rust. Therefore, the maintance cost of weather resistant steel plate is low. The weather resistant steel plate is suitable for outside structure and construction use.

The hot rolling method is to heat the EN 10025-6 S690QL1 high strength steel steel material to about 1000 ℃ ~ 1250 ℃ and use the rolling mill to roll it. The traditional hot rolling process is generally divided into the following two steps: the first step is to use the primary rolling mill or billet rolling mill to roll the ingot, billet or continuous casting billet into a certain shape and size of billet. This kind of EN 10025-6 S690QL1 high strength steel rolling process is usually called semi-finished product production, also called blank production.

The executive standard of P235TR1 steel is EN 10216-1. EN 10025-6 S690QL1 high strength steel, P235TR1 steel is suitable for manufacturing pipes, vessels, equipment, pipe fittings and steel structures. Chemical composition of P235TR1 steel: C ≤ 0.16, Si ≤ 0.35, Mn ≤ 1.2, P ≤ 0.025, S ≤ 0.02, Cr ≤ 0.30, Mo ≤ 0.06, Ni ≤ 0.30, Cu ≤ 0.30, Nb ≤ 0.01, Ti ≤ 0.04, V ≤ 0.02. Chemical composition of P235TR1 steel: tensile strength 360-500 MPa, yield strength ≥ 235 MPa, elongation ≥ 25%. The main steel pipe grades under EN 10216-1 are P195TR1, P195TR2, P235TR1, P235TR2, P265TR1 and P265TR2.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.