Welcome to BBN High Strength Steels Factory

Hot/cold rolled S690QL rockwell hardness

The company's operation is based on the principle of "quality for survival, reputation for development". In terms of management, we adhere to the principle of people-oriented, service-oriented and customer-oriented. All staff of the company have the courage to open up, unite and forge ahead, and work hard to grasp the good situation of global economic development, actively strengthen communication with outstanding enterprises in the S690QL rockwell hardness industry, keep pace with the times, and move towards a new course!

Boiler steel plates are mainly used to manufacture various boilers and important accessories. Because the boiler steel plate is working under medium temperature (below 350°C) and high pressure, in addition to high pressure, it is also subject to impact, fatigue load and water and gas corrosion. It is required to ensure a certain strength and also have good welding and cold bending performance. Common grades: Q245R, A515 Grade 55, A515 Grade 60, S690QL rockwell hardness, A516 Grade 65, A516 Grade 70.

45# steel is commonly used medium carbon quenched and tempered structural steel. The steel S690QL rockwell hardness is generally cold plastic, annealing and normalizing are slightly better than quenching and tempering, with higher strength and better machinability. After proper heat treatment, 45# carbon steel can certain toughness, plasticity and wear resistance can be obtained. 45# steel normalizing can improve the cutting performance of roughness less than 160HBS.

Penetration testing technology is only suitable for detecting surface defects. It uses penetrant to apply on the surface of the S690QL rockwell hardness steel plate, then wipes the excess penetrant with the cleaning solution, and then smears the developer. The penetrant remaining in the defect is adsorbed by the developing material, so as to observe the shape of the defect and determine the type of defect. This S690QL rockwell hardness method requires multiple wipes before and after the inspection, the process is more cumbersome, and can not detect internal defects and rough and dirty steel plates.

A335 P22 steel pipe belongs to ferrite alloy steel nominal pipe for high temperature use. Chemical composition of A335 P22 steel pipe: C 0.10-0.20, Mn 0.30-0.80, P ≤ 0.025, S ≤ 0.025, Si 0.10-0.50, Mo 0.44-0.65. Mechanical properties of A335 P22 steel pipe: tensile strength 415mpa, yield strength 205 MPa. S690QL rockwell hardness, A335 P22 steel pipe is characterized by good process performance, less sensitivity to the heating temperature of heat treatment, good welding performance, good plasticity, and low strength, especially the high temperature rupture strength is lower than 12Cr1MoV steel. When used at the same temperature and stress, its wall thickness is about 30% thicker than 12Cr1MoV Steel.

To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent S690QL rockwell hardness products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the S690QL rockwell hardness technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels