Welcome to BBN High Strength Steels Factory

Low carbon steel EN 10025-6 high strength steel S500QL1 application

SA516 Gr65 sheet is a carbon steel plate for medium and low temperature pressure vessels. It implements the ASME standard of the American Standard. It can provide a minimum thickness of 8mm and a width of 1500~4000mm. The EN 10025-6 high strength steel S500QL1 product thickness direction (Z-direction) resistance to tearing and wet hydrogen sulfide corrosion can be added Performance (HIC+SSCC) steel. Steel used to manufacture pressure vessels for petrochemical, gas separation and gas storage and transportation equipment.

The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with EN 10025-6 high strength steel S500QL1, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.

We can cut the large steel plates EN 10025-6 high strength steel S500QL1 by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the EN 10025-6 high strength steel S500QL1 product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

SG255 gas cylinder EN 10025-6 high strength steel S500QL1 steel is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator. The company is a professional gas cylinder steel exporter and a steel stockist in china. We keep more than 1000 tons SG255 gas cylinder steel coils in EN 10025-6 high strength steel S500QL1 stock every month. If you want to get the steel price, please do not hesitate to contact us. Any need in SG255 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us.

The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels