material S690QL is required to have high toughness

The company now has material S690QL oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than material S690QL 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

The main steel plates for oil and gas pipelines are X42, X46, X52 (L360), X56 (L390), X60 (L420), X65 (L460), X70, X80. The specification range of steel plate used by the company for oil and gas pipelines: thickness 8mm-60mm. It can produce additional flaw detection requirements and Z15-Z35 tear resistance (thickness direction performance) steel plates material S690QL, and can also provide Z-direction performance steel plates according to ASTM A770 and other standards.

From the name, we can clearly know that seamless pipe is seamless steel pipe, which is different from welded pipe. Seamless pipe is actually a kind of steel with hollow section. material S690QL, Seamless pipe has many advantages, such as: 1, the compressive capacity of seamless pipe is very good, the place with high bearing strength will not crack, and its bearing capacity is very good. 2. Seamless pipe has no welding point, so it is more corrosion-resistant and can bear larger pressure.

Advantages of hot rolling: hot rolling can destroy the casting structure of ingot, refine the grain of steel and eliminate the defects of microstructure, so that the steel structure is dense and the mechanical properties are improved. This improvement is mainly reflected in the rolling direction, so that the material S690QL steel is no longer isotropic to some extent; the bubbles, cracks and looseness formed during pouring can also be welded under the action of high temperature and pressure.

material S690QL, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel material S690QL plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.