Welcome to BBN High Strength Steels Factory
Chrome-Moly low alloy steel S890Q steel series contains 0.5% - 9% Cr and 0.5% - 1% Mo and lower than 0.20% carbon. 40CrNiMoA, 4340 and SNCM439 are the low alloy chromoly steel materials from the different standards. 40CrNiMoA steel S890Q steel is a Chinese standard chromium-molybdenum high strength steel with good hardenability and toughness.
Boiler steel refers to the special steel used to manufacture pressure components of steam boilers, such as steam drums. The boiler steel mainly means boiler steel plates and seamless boiler steel pipes. Boiler components not only bear pressure loads but are also heated by direct fire, so the requirements on the chemical composition and mechanical properties of boiler steel, S890Q steel are strict. In the chemical composition of boiler steel, S890Q steel, sulfur and phosphorus are strictly controlled. Tensile strength, yield point, elongation, impact energy value and 180 ° cold bending are required to be tested in boiler steel mechanical properties. In addition, strain aging impact test is also required for boiler steel. The quality control of boiler steel is slightly higher than that of pressure vessel steel.
S890Q steel, SA387Gr11CL2 steel chemical composition(%): C: ≤0.15, Si: 0.44—0.86, Mn: 0.35—0.73, P: ≤0.10, S: ≤0.007, Cr: 0.94—1.56, Mo: 0.40—0.70, Ni: ≤0.25, Cu: ≤0.20, Sb: ≤0.0030, Sn: ≤0.015, As: ≤0.016.SA387Gr11CL2 steel mechanical properties: Tensile strength, ksi [MPa]: 75 to 100 [515 to 690]; Yield strength, min, ksi [MPa]: 43 [310]Elongation in 8 in. [200mm], min %: 18; Elongation in 2 in. [50mm], min, %: 22
The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.
Leave a Message