New technology of S690QL quenched and tempered material cutting

In recent years, in line with the development trend of iron and S690QL quenched and tempered material steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc., which S690QL quenched and tempered material are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields. Meanwhile, we also provide deep processing for the steel materials.

Q355NH material has a protective rust layer that resists atmospheric corrosion and can be used to manufacture low-alloy structural steels for steel structures such as vehicles, bridges, towers, containers, etc. It can also be used to manufacture structural parts such as containers, railway vehicles, oil derricks, seaport buildings, oil production platforms, and containers containing hydrogen sulfide corrosive media in chemical and petroleum equipment.

Compared with 15Cr steel, 20Cr alloy has higher strength and hardenability. The critical hardening diameter in oil is 4-22mm, and the critical hardening diameter in water is 11-40mm, but the toughness is poor. This S690QL quenched and tempered material alloy steel S690QL quenched and tempered material still has a tendency to grow grains during carburization, and direct quenching at lower temperature has a greater impact on impact toughness, so secondary quenching is required after carburization to improve the toughness of the core of the part, and there is no temper brittleness.

The preparation of S690QL quenched and tempered material galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for S690QL quenched and tempered material centralized control, two-layer welding process, reducing the possibility of incomplete penetration.

Shipbuilding steel S690QL quenched and tempered material order online:14*1950*10700, 14*1950*10800, 16*2100*10650, 16*2150*10000, 16*2150*10250, 16*2150*10350, 16*2150*10400, 20*2100*11600, 20*2150*10000, 25*1950*10150, 25*1950*9700, 25*2100*8400, 25*2100*8650, 25*2400*11600, 32*2500*6000, 34*1900*12000, 34*1300*4000, 35*2500*9000, 70*2240*7600, 70*2270*7470, 70*2270*7900, 85*2230*8100.

In addition to quality assurance, service is also important for the competition of steel suppliers. All the after-sales service personnel of the company have received professional training and assessment. The steel products supplied by our company enjoy the life-long quality problem replacement service. In the process of using our steel S690QL quenched and tempered material products, if there is any problem, just contact us in time, and our after-sales service personnel will look for countermeasures and solve the problem with you as soon as possible.