Welcome to BBN High Strength Steels Factory

S460QL material specification name in different countries

For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second quarter, the output of overseas pig iron will be reduced by 11.67 million tons, affecting the demand for S460QL material specification iron ore of about 1.84 million tons; in the first half of the year, the output will be reduced by 18.899 million tons, affecting the demand for iron ore of 32.13 million tons.

BBN employees work hard and work hard in their work. In life, colleagues care about each other, like a family, and accompany each other at important moments in life. BBN Steel organizes employees to carry out tourism activities every year, so that families can be exposed to nature and relax physically and mentally. The good combination of working and rest can achieve the goal of hard work and happy life.

We can supply profiled plate in a range of grades in thicknesses up to 400mm and dimensionally we can cut up to 24 meters in length and 5 meters wide with flame cutting, plasma cutting and laser cutting service. This capability is backed by an in-house CAD team, capacity that enables us to work to short lead times and an established delivery network that ensures you receive the steel S460QL material specification products when you need it.

Q420C steel belongs to low alloy high strength steel. Q420 is named as the steel with yield strength of 420MPa, C means the impact temperature is 0 ℃, and Q is the abbreviation of yield strength. Chemical composition of Q420C steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.035, S ≤ 0.035, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20. The mechanical properties of Q420C steel are: yield strength ≥ 340 Mpa, tensile strength 500-680 Mpa, elongation after fracture ≥ 18%, impact energy 34J. S460QL material specification, Q420C steel has good mechanical properties and weldability, good cold and hot workability.

In 2013, one of our clients in Korea purchased 890 tons Q345B square tube from us for one building construction project. Our clients required no burr in the side of the tube, we finally produce the goods with great condition and +/-0.25mm tolerance for wall thickness, which is a very great tolerance with customers’ required size. Our square tube full available range is 2-16mm for wall thickness, and 40-500mm for width. In addition, our Q/C department will seriously control all of the process of every order.

If you want to find wear resistant steel plates or abrasion resistant steel supplier and exporter in China, please visit us. We are one of the leading S460QL material specification wear resistant steel plates manufactures and stock keepers. We have large stocks for wear resistant steel plates of various grades and dimension. We can not only send offer at the first time, but can also provide technical support and give you professional suggestions and answers about NM400 S460QL material specification steel specifications, difference between hardox 400 and AR400 and so on question about wear resistant steel plates. Come on! Just call us or send email.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels