Welcome to BBN High Strength Steels Factory
Smelting process of S550 steel specification, container plate SPA-H weather-resistant steel: The molten iron for smelting SPA-H steel must be pretreated by molten iron desulfurization. Before entering the converter, the sulfur content of the molten iron is ≤0.010%, and the slag on the surface of the molten iron is cleaned. Nickel plates, copper particles or nickel-copper alloys are added to the converter with scrap steel. The carbon content of the converter smelting end is required to be less than 0.06% to prevent the molten steel from being oxidized.
The alloy steel plate has higher oxidation resistance and corrosion resistance, and is more suitable for use in acid and alkali environments. The surface of alloy steel plate will not be oxidized and corroded, maintaining the brightness of the steel plate. The alloy steel plate also has high material strength, its pressure bearing performance is very outstanding. It has high plasticity under the condition of long-lasting stretching. The S550 steel specification, alloy steel plate is not prone to fracture, and it is more durable.
The cold bending method is mainly used to produce cold-formed section steel and welded pipe. The cold bending method is to bend the steel strip or steel plate into various cross-section shapes by the cold bending machine in the cold state. If the S550 steel specification steel pipe is bent into a circular, square or other hollow shape and welded by a proper welding method, it is a welded pipe. The advantages of cold bending: first, the cold-formed section steel is light in weight and large in bearing capacity, and it can save metal by replacing the hot-rolled section steel; second, it can produce all kinds of S550 steel specification extremely thin, extremely wide and complex section steel which can not be produced by hot rolling.
For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate S550 steel specification EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
Leave a Message