S690QL brinell iron roof sheet

ASME SA203 is a low-nickel alloy steel, including five grades of A, B, D, E, and F. SA203 Gr.E steel plate impact temperature -101 ° C. SA203 Gr.D / E / F has good impact toughness and mechanical properties under low temperature working conditions, and is usually used in low temperature environments of -70 ～ -101 ℃ (the tempered state can be -107 ℃). S690QL brinell Smelting method: It is smelted by electric furnace + refining outside the furnace + vacuum degassing, and should be fine grain killed steel.

"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, S690QL brinell tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."

Semi-endless rolling technology has three advantages: the S690QL brinell product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.

Tags: