Welcome to BBN High Strength Steels Factory
40Cr alloy belongs to gb3077 "alloy structural steel". The carbon content of 40Cr steel is 0.37% ~ 0.44%, which is slightly lower than that of 45 steel. The content of Si and Mn is equivalent, and the content of Cr is 0.80% ~ 1.10%. In the case of hot rolling supply, the 1% Cr basically does not work, and their mechanical properties are roughly the same. Because the price of S690QL material number is about half of that of 45 steel, 40Cr is not needed for the purpose of economy.
The company was established in 2000, covering an area of more than 4,500 acres. It has fixed assets of 200 million yuan, and employs more than 1,200 people. It has now formed coking, sintering, white ash, pellets, ironmaking, S690QL material number steelmaking, steel rolling, oxygen production, gas and waste heat The complete circular economy industrial chain including power generation, comprehensive utilization of slag, soot and dust treatment, sewage treatment and recycling, etc. It mainly produces hot-rolled steel plates and S690QL material number carbon structural steels, high-quality carbon structural steels, low-alloy high-strength steels, medium and wide-band steels for cold-rolled stamping, and hot-rolled coils.
Rolling steel is the process of pressing to change the shape of the ingot and billet between the rotating rolls. The so-called steel rolling process is a combination of a series of steel rolling processes. The entire rolling production process is always composed of the following S690QL material number basic processes: ① billet preparation:Including the cleaning of surface defects, the removal of surface scale and the pre-heat treatment of billets. ② billet heating ③ steel rolling: it is the core of the entire rolling production process. ④ Finishing.
The final heat treatment of quenched and tempered alloy steel, S690QL material number is quenching and high temperature tempering. The hardenability of quenched and tempered alloy steel is high, and oil is generally used. When the hardenability is very high, it can even be air cooled, which can reduce the defects of heat treatment. The final properties of quenched and tempered alloy steel depend on tempering temperature. Generally, it is tempered at 500 ℃ - 650 ℃. The required properties can be obtained by selecting tempering temperature. In order to prevent the second kind of temper brittleness, fast cooling (water cooling or oil cooling) after tempering is beneficial to the improvement of toughness.
It is very important for a company to have a sound after-sales service system, which better guarantees the interests of customers and increases the reliability of the company's products in the hearts of customers. Our company has a dedicated after-sales service team and good after-sales service reputation, and has been recognized by customers over the past decades. Whenever there is problem about our S690QL material number steel materials during application on the user site, our after-sales service persons will assist to find solutions at the first time.
Leave a Message