S690QL steel equivalent Material Specification

Steel S690QL steel equivalent exports fell sharply year on year. According to the data of the General Administration of customs, 7.811 million tons of steel were exported from January to February, a year-on-year decrease of 27.0%; 2.041 million tons of imported steel, a year-on-year increase of 2.1%. Steel prices continue to fall. According to the monitoring of China Iron and Steel Industry Association, China's steel S690QL steel equivalent composite price index at the end of January was 105.48 points, down 0.58% month on month; at the end of February, the index continued to decline to 100.39 points, down 4.83% month on month.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us S690QL steel equivalent specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

40Cr alloy belongs to gb3077 "alloy structural steel". The carbon content of 40Cr steel is 0.37% ~ 0.44%, which is slightly lower than that of 45 steel. The content of Si and Mn is equivalent, and the content of Cr is 0.80% ~ 1.10%. In the case of hot rolling supply, the 1% Cr basically does not work, and their mechanical properties are roughly the same. Because the price of S690QL steel equivalent is about half of that of 45 steel, 40Cr is not needed for the purpose of economy.

S355NL steel plate is under EN10111 standard. We can regard S690QL steel equivalent, S355NL steel plate as Fine-grain structural steels, normalised rolled. S355NL steel plate is one mainly of Fine-grain structural steels, normalised rolled, The normalized rolled fine-grain structural steel S355NL is characterized by a minimum yield strength of 355 MPa, by good weldability and high resistance to brittle fracture, which is same with DIN:TStE355 and BS:55EE

In 2016. Our company offer 1200 tons API 5L GR.B hot rolled coil to Bangladesh——100 tons for 3.9*625mm, and 1100 tons for 7*683mm. It is one tender project, we get the tender at the end of 2015, and arrange the production in 2016. They required the tolerance of thickness is +0.1/-0.2mm, and width tolerance is +/-0.5mm, which is a very high requirement for coil tolerance, but our mill handling this very well. and our Q/C department witness all of the process.

The boiler steel plates are among our main products. Other than standard size boiler steel plates, we also provide S690QL steel equivalent cutting, bending and so on processing to change plate size and shape according to your requirements. Welcome to consult us about S690QL steel equivalent ASTM A204 grade B properties, SA 516 gr 70 temperature range, ASTM A285 grade C chemical composition, boiler steel price and so on questions and ask for offer.