S690QL steel material production standard pdf

The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as S690QL steel material production, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.

S690QL steel material production and Q690CF plate are hot rolled steel plates. The chemical composition of Q690CF steel is as follows: C: 0.05-0.08%, Si: 0.22-0.30%, Mn: 1.6-2.0%, Al: 0.2-0.35%, Cr: 0.10-0.35%, Mo: 0.20-0.35%, Ni: 0.1-0.4%, Cu: 0.15-0.3%, Nb: 0.025-0.045%, V: 0.01-0.03%, Ti: 0.005-0.03%, P ≤ 0.010%, S ≤ 0.008% by mass percentage, the remaining is Fe and unavoidable impurities.

The company adheres to the management concept of "people-oriented, talent is concerned", develops business with the spirit of "believing strength, practical style, S690QL steel material production professional service and dare to compete", and provides customers with "professional, value-added and effective" service support. For the company's development and take-off, we work together to move forward and create a better S690QL steel material production tomorrow!

After extrusion, the S690QL steel material production tube shall be removed for sizing. The sizing machine uses a cone-shaped bit to rotate into the steel embryo at high speed to drill holes to form steel pipes. The inner diameter of the steel pipe is determined by the outer diameter length of the drill bit of the sizing machine. After sizing, the steel pipe will enter the cooling tower and be cooled by water spray. After cooling, the steel pipe will be straightened. After straightening, the steel pipe is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection.

Tags: