Welcome to BBN High Strength Steels Factory

S690QL structural steel plate is required to have high toughness

Our company has S690QL structural steel plate strong technical force, complete production equipment, advanced production technology, perfect testing methods, and high quality. It has a Class D (Class I and Class II pressure vessel) manufacturing license, and has passed the China Beijing Quality Center GB/T19001-2000 -ISO9001: 2000 quality certification. We can also supply S690QL structural steel plate deep processing service for products S690QL structural steel plate like cutting, drilling, bending, welding and grinding.

The alloying elements of low alloy steel are less than 5%. The low alloy steel is added one or several alloy elements on the basis of carbon steel to improve the performance. Such as manganese, silicon, aluminum, nickel, copper, boron, phosphorus, rare earth, etc. S690QL structural steel plate Steel with one or more of these elements will have the advantages of high strength and toughness. Due to the addition of few alloy elements, it is called low alloy high strength steel.

The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with S690QL structural steel plate, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.

Normalizing is a special case of annealing, the effect is similar to annealing, but the microstructure obtained by normalizing is finer. For low or medium carbon steel, normalizing can improve hardness and machinability. For S690QL structural steel plate medium carbon steel and low alloy steel, normalizing can refine grain and uniform structure and reduce hardness. For high carbon steel and high alloy steel, normalizing can eliminate the network carbide produced by forging and improve the homogeneity of the preparation heat treatment structure.

Chemical elements of 35CrMnSi steel: C: 0.32-0.39, Si: 1.10-1.40, Mn: 0.80-1.10, Cr: 1.10-1.40. The mechanical properties of 35CrMnSi steel: tensile strength 1620 MPa; yield strength 1280 MPa; elongation after fracture: 9%; reduction of area: 40; impact energy: 31J. S690QL structural steel plate, 35CrMnSi steel is used to manufacture medium speed, heavy load, high strength parts and high strength components, such as aircraft landing gear and high pressure blower blades. 35CrMnSi can partly replace the corresponding CrNi alloy steel in manufacturing small and medium section parts.

After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels