Welcome to BBN High Strength Steels Factory

S690QL welding top manufacturer in China

The large diameter cold drawn seamless steel pipe is a steel pipe with an outer diameter of more than 1000mm. The large diameter seamless steel pipe is made of steel ingot or solid billet through perforation and then hot rolling, cold rolling or cold drawing. If they are long, they need to remove the redundant parts, that is, cut them out. Their length S690QL welding is suitable for the length required by the construction of steel pipes.

20 to 26mm thick S690QL welding product BBN steel supply: 20*3000*5000, 20.5*2370*7000, 21*1960*7950, 22*1800*8000, 22*1500*6000, 22*1500*6050, 22.5*1680*8450, 22*1300*4000, 22*2600*9000, 22*1800*9000, 22.5*2560*7150, 23.5*2560*7150, 25*1460*4000, 23*3000*11980, 23*2480*8450, 23*2650*6000, 24*1560*6200, 25.5*2330*8300, 23*3000*12000, 23.5*2080*8100, 23*2650*6550, 26*3010*8100.

ASME SA514 grade H alloy steel coil element composition%C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.95-1.30, P max.: 0.035, S max.: 0.035, Cr: 0.40-0.65, Ni: 0.30-0.70, Mo: 0.20-0.30, V: 0.03-0.08, B: 0.001-0.005
The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18

We can cut the large steel plates S690QL welding by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the S690QL welding product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

Tags:

Leave a Message

EN 10025-6 S690QL High Strength Steels