S690QL1 EN 10025-6 high strength steel need painting or not

Since its establishment, the company has always adhered to the enterprise spirit of "solid feet and lofty ideals, dare to create and take responsibility, and dedicate to work". After years of careful management, the company has achieved the double improvement of S690QL1 EN 10025-6 high strength steel capital strength and scale expansion, gained wide recognition and general praise from all walks of life, further realized specialized and large-scale operation and optimized allocation of resources, and effectively improved the S690QL1 EN 10025-6 high strength steel overall strength, competitiveness and anti risk ability of the company.

Welded steel pipe refers to the steel pipe with a joint on the surface which is welded after the steel strip or steel plate is bent and deformed into circular, square and other expected shapes. According to different welding methods, it can be divided into arc welded pipe, high frequency or low frequency resistance welded pipe, gas welded pipe, furnace welded pipe, Bondi pipe, S690QL1 EN 10025-6 high strength steel, etc. According to the weld shape, it can be divided into straight welded pipe and spiral welded pipe. Electric welded steel pipes are mainly used in oil drilling and production, machinery manufacturing, etc.; furnace welded pipes can be used as water gas pipes, large-diameter straight seam welded pipes for high-pressure oil-gas transmission, etc.; spiral welded pipes are used for oil-gas transmission, pipe piles, piers, etc. Welded steel pipe has lower cost and higher production efficiency than seamless steel pipe.

37SiMn2MoV steel is high-grade quenched and tempered steel. S690QL1 EN 10025-6 high strength steel, 37SiMn2MoV steel has excellent comprehensive mechanical properties, good heat treatment process, good hardenability, low sensitivity to quenching crack, high resistance to tempering, very low temper brittleness, good high temperature strength and low temperature toughness. Chemical composition of 37SiMn2MoV steel: C: 0.33-0.39, Si: 0.60-0.90, Mn: 1.60-1.90, Mo 0.40-0.50, V: 0.05-0.12. After quenching and tempering, 37SiMn2MoV steel is usually used to manufacture heavy load and large section important parts.

Non-destructive flaw detection of steel plates is a test method for inspecting the S690QL1 EN 10025-6 high strength steel surface and internal quality of the inspected parts without damaging the working state of the workpiece or raw materials. Commonly used S690QL1 EN 10025-6 high strength steel steel plate flaw detection methods include: X-ray flaw detection, ultrasonic flaw detection, magnetic particle flaw detection, penetration flaw detection, eddy current flaw detection, gamma-ray flaw detection, fluorescent flaw detection, color flaw detection and other methods. Physical flaw detection is non-destructive flaw detection without any chemical changes.

What is the difference between Q345B steel and Q345A steel?
S690QL1 EN 10025-6 high strength steel, Q345B steel and Q345A steel have slight difference in chemical composition:
Q345A steel: C ≤ 0.20, Mn ≤ 1.7, Si ≤ 0.55, P ≤ 0.045, S ≤ 0.045, V 0.02 ~ 0.15;
Q345B steel: C ≤ 0.20, Mn ≤ 1.7, Si ≤ 0.55, P ≤ 0.040, S ≤ 0.040, V 0.02 ~ 0.15.
The difference between Q345B steel and Q345A steel is mainly in A and B behind the steel grade, Q345A steel grade is not subject to impact; Q345B steel grade needs 20 ℃ room temperature impact test.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.