Welcome to BBN High Strength Steels Factory
Nowadays, transportation is an important factor in economic development. Our company's rapid development is also inseparable from a good geographical location. The company is located in Zhengzhou, an important S690QL1 properties heavy industry area in Central China. Whether you are in Beijing, Shanghai or Guangzhou, you can visit our company very easily. My factory is nearby, convenient transportation and time saving.
Q500C heavy plate specification available: 6*2000*8000, 6*2500*4000, 21.5*2440*4400, 125*2200*12000, 14*1600*6000, 45*2020*6700, 21.5*2440*4850, 30*2200*12000, 15*2200*5500, 45*1550*4900, 15*2200*5800, 12*2200*12000, 30*2300*6400, 45*1800*6500, 6*1700*10300, 16*2200*10000, 28*2450*8050, 21.5*2440*3950, 7*2220*8050, 21.5*2400*12930, 14*2600*10100, 6*1200*10300, 10*1800*13500.
Special boiler steel is derived from carbon structural steel. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same level, but the S690QL1 properties steel mechanical property requirements are more strict, especially for impact toughness. And the aging sensitivity is required to be small. The boiler steel should be deoxidized and the non-metallic inclusions should be removed during smelting. The structure should be uniform. The grain size should be controlled in 3-7 grades. The defects such as interlayer, shrinkage, porosity and porosity should be minimized.
The purpose of S690QL1 properties quenching is to transform the supercooled austenite into martensite or bainite to obtain a martensite or bainite structure, and then cooperate with tempering at different temperatures to greatly improve the strength, hardness, performance, fatigue strength, toughness, and wear resistance etc. of S690QL1 properties. So as to meet the different use requirements of various mechanical parts and tools. Quenching can also help to get the ferromagnetic, corrosion resistance and other special physical and chemical properties of certain special steels.
20Mn2 steel has medium strength, and the properties of 20Mn2 steel and 20Cr steel are similar. The impact toughness and weldability of 20Mn2 steel at low temperature are better than those of 20Cr steel. The plasticity and machinability of 20Mn2 steel are high during cold deformation. The hardenability of 20Mn2 steel is higher than that of corresponding carbon steel, S690QL1 properties. Chemical composition of 20Mn2 steel: C: 0.17-0.24, Si: 0.17-0.37, Mn: 1.40-1.80. Mechanical properties of 20Mn2 steel: tensile strength ≥ 785 MPa, yield strength ≥ 590 MPa, elongation after fracture ≥ 10%, section expansion rate ≥ 40%, impact absorbed energy ≥ 47J.
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
Leave a Message