S890 steel equivalent vs a36

The steel plates for SA302GrC boilers must withstand different pressures and strengths due to the manufactured containers. Generally, the normal pressure is 314MPa or higher, and the working temperature is often between -20°C and 450°C. According to the working conditions and processing requirements of the vessel, the steel plate must have good cold bending and welding performance, good plasticity and toughness, and high temperature short-term strength or long-term strength performance.

Temperature has a great influence on the strength of the material, S890 steel equivalent. When the temperature exceeds a certain value, the strength limit of the steel will be reduced. The higher the temperature, the lower the strength. In addition, the longer the steel is used at high temperature, the lower the strength. Therefore, if the steel works at high temperature for a long time, the instantaneous strength of the steel can not be used as its performance index, nor can the room temperature performance replace the high temperature performance.

The advantage of hot-rolled stainless steel plate is that it can eliminate the damage caused by S890 steel equivalent metal structure in the process of ingot casting to a certain extent, eliminate some tiny defects in the structure, refine the grains of stainless steel material, promote the structure of steel closer, and improve the performance of the material as a whole. This kind of lifting is mainly manifested in the rolling direction, which can make the S890 steel equivalent steel no longer isotropic to some extent, and some defects such as bubbles, cracks and looseness formed during pouring can be eliminated under high temperature or high pressure.

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.

Tags: