S960QL EN 10025-6 high strength steel manufacturing plant

Steel S960QL EN 10025-6 high strength steel exports fell sharply year on year. According to the data of the General Administration of customs, 7.811 million tons of steel were exported from January to February, a year-on-year decrease of 27.0%; 2.041 million tons of imported steel, a year-on-year increase of 2.1%. Steel prices continue to fall. According to the monitoring of China Iron and Steel Industry Association, China's steel S960QL EN 10025-6 high strength steel composite price index at the end of January was 105.48 points, down 0.58% month on month; at the end of February, the index continued to decline to 100.39 points, down 4.83% month on month.

The company has a group of mature steel plate production and processing line construction and production management experience. In addition, the company has professional and technical personnel. BBN steel is a modern enterprise integrating scientific research and development, production processing, sales and service. The company now has finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. At the same time, it also adheres to international standards and adheres to the international line.

S960QL EN 10025-6 high strength steel surface cracks refer to the linear cracks on the surface of S960QL EN 10025-6 high strength steel, which should generally be the same as the forging or rolling direction. Formation reason: it is mainly due to the hairline, hot crack and cold crack caused by surface over burning, decarburization, looseness, deformation and excessive internal stress during processing (forging, rolling, heat treatment, quenching and tempering), as well as the high content of sulfur and phosphorus impurities on the surface. Inspection method: S960QL EN 10025-6 high strength steel surface cracks can be detected by naked eye observation, acid pickling, magnetic particle inspection, coloring inspection and metallographic method.

P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. S960QL EN 10025-6 high strength steel, P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.

In 2016, we brought our customer to visit our NM400 hot rolled plate; producing line and our shanghai warehouse for 30,000 tons plate and structure. As a result, Our client purchased 500 tons NM400 as first order, which is shipped by 3 times. In future. Our company will always guarantee that all the delivery condition for Hardox plate S960QL EN 10025-6 high strength steel provided will be with quenching and tempering, which is the best delivery type according GB/T 24186 standard.

As leading EN10025-6 S460QL structural steel plates supplier in China, our company has supplied hundreds of thousands tons S460QL steel plates to clients to assist them finish one after another S960QL EN 10025-6 high strength steel magnificent projects.