Welcome to BBN High Strength Steels Factory
BBN steel company was founded in 2000, starting the international business in 2010 and successfully being approved and certified by ISO9001:2008. After ten years development, BBN steel has become the large-scale comprehensive enterprise group, combining steel trading, S960QL material plate processing, and steel distribution, also have large warehouse and processional representatives both inTianJin, Zhengzhou and Beijing city.
ASTM A572 Grade 50, used in large-scale construction, S960QL material is an extremely strong alloy with a yield strength of 65,000 psi, an allowable bending stress of 39,000 psi and a future as the high-performance replacement of ASTM A36 steel.
Q235 steel grades cover Q235A, Q235B, Q235C and Q235D. Other than Q235A, the other three Q235 steel grades needs impact test. Charpy V-notch specimen is used for impact toughness test. The impact toughness index is Akv. Q235 steel plates are widely used because of its moderate carbon content, good comprehensive performance, good coordination of strength, plasticity and welding performance.
In order to easily and economically perform hot or cold processing to make various parts of engineering structures, the low alloy high strength steel must have appropriate forming properties. Like S960QL material, carbon structural steel, low alloy high strength steel can generally be processed in such way, as well as cutting, punching, and machining. Although the yield point of low alloy high strength steel is high, even if the forming operation is deformed quite severely, cold bending presses, drawing machines, presses and other equipment used for carbon structural steel forming can also be used for low alloy high strength steel, but some equipment needs to be modified.
S960QL material, 12Cr1MoV steel is alloy structure steels, and it is usually produced into 12Cr1MoV steel coil, 12Cr1MoV steel sheet, 12Cr1MoV steel plate, 12Cr1MoV steel bar, etc. 12Cr1MoV steel is composed of Carbon, Silicon, Manganese, Chrome, Molybdenum and so on chemical elements. Amng them, the C content is 0.08-0.15, Si 0.17-0.37, Mn 0.40-0.70, Cr 0.90-1.20, Mo 0.25-0.35. The tensile strength of 12Cr1MoV steel is not lower than 490 Mpa, and yield strength is not lower than 245 Mpa.
The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.
Leave a Message