South Korea 1.8906 steel Prices News

A small amount of Nb is sufficient to obtain excellent comprehensive properties of 1.8906 steel etc. steel material, because at low Nb concentration, the yield strength of steel material increases faster and is proportional to the concentration, but when the Nb content is greater than 0.03%, the strengthening effect begins to decrease. Studies have shown that when the Nb content is greater than 0.06%, excess Nb will no longer strengthen the steel material.

The quality grade symbols of Q235 steel plate are A, B, C and D respectively. Different grades represent different impact temperatures. 1.8906 steel, Q235A is not required for impact toughness test; Q235B is required for impact toughness test at room temperature (20 ℃); Q235C is required for impact toughness test at 0 ℃; Q235D is required for impact toughness test at - 20 ℃. For the above-mentioned B, C and D grade steels, Akv ≥27J is required under different temperature requirements. At different impact temperature, the impact value is also different.

In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the 1.8906 steel steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.

Our steel pipes include four major types which are seamless pipe, ERW pipe, LSAW pipe, SSAW pipe, 1.8906 steel. Seamless pipe supply scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--60mm. The ERW pipes production range from OD 21.3mm--660mm, wall thickness 1.0mm--16mm. LSAW pipes can supply with OD 406mm--1524mm, wall thickness 6mm--50mm. SSAW pipes can produce maximum OD 3500mm, minimum OD 219.1mm, wall thickness 3.2--25.4mm.

Tags: