Supply the free EN 10025-6 high strength steel S690QL+QT chemical composition data

The company has allocated special environmental protection facilities for all EN 10025-6 high strength steel S690QL+QT pollution sources, strengthened the recycling of waste resources and improved the efficiency of resource utilization. At present, the recovery and utilization rate of solid wastes such as iron slag, steel slag, iron bearing dust, EN 10025-6 high strength steel S690QL+QT steel mill scale, environmental protection dust has reached 100%.

Steel transportation because of the special material of EN 10025-6 high strength steel S690QL+QT steel, is a metal with "iron" as the main basic element, small volume and large weight, and easy to oxidize and rust when contacting with air and rain water, so there are many precautions in the transportation of steel. There are 11 proverbs for steel transportation: "evenly placed, moisture-proof and rust proof". Our company chooses the logistics aspect to be very rigorous, takes the customer's request as the standard, guarantees the steel product quality.

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

In 2014, we offered 175 ton Cold rolled stainless steel plate to Thailand. The EN 10025-6 high strength steel S690QL+QT products are from TISCO. Here is the MTC that we offered to customer. We have our own quality team. Our quality team will inspect every order before shipment for customer. Normally, we will test the chemical composition, thickness, width, and length. Here are some pictures for last inspection.

EN 10025-6 high strength steel S690QL+QT, A572 Grade 50 steel with the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the A572 Grade 50 steel coil thickness should not exceed 25 mm. For A572 Grade 50 steel, the C element content is 0.23%, the Si element content is 0.4% max, the Mn element content is 1.35% max, the P element content is 0.004% max, the S element content is 0.05% max, the V element content is 0.06%, the Ni element content is 0.015%, the Co element content is 0.05%.

Do a good job of thought introduction based on people. Human based management is the most important link in standardizing employee behavior management. In daily behavior management, we should establish the central position of human and play an important role of human. Employees are not only the builders and exercisers of corporate culture, but also the executors of code of conduct. The code of conduct should be finally implemented into the thoughts and actions of employees.