Welcome to BBN High Strength Steels Factory
The development EN 10025-6 grade S690QL of the company comes from the resource advantage, service advantage, logistics advantage and brand advantage established over the years, and it is also inseparable from the full support of new and old customers. We will uphold the support of all sectors of society, actively provide users with EN 10025-6 grade S690QL high-quality and efficient services, work together for win-win, and create a better tomorrow!
EN 10025-6 grade S690QL, Q345B low alloy plate performance: 1) High strength: Generally its yield strength is above 300MPa; 2) High toughness: The elongation is required to be 15% to 20%, and the room temperature impact toughness is greater than 600kJ/m to 800kJ/m. For large welded components, higher fracture toughness is also required; 3) Good welding performance and cold forming performance; 4) Low cold brittle transition temperature; 5) Good corrosion resistance.
What is the difference between Q345B steel and Q345A steel? EN 10025-6 grade S690QL, Q345B steel and Q345A steel have slight difference in chemical composition: Q345A steel: C ≤ 0.20, Mn ≤ 1.7, Si ≤ 0.55, P ≤ 0.045, S ≤ 0.045, V 0.02 ~ 0.15; Q345B steel: C ≤ 0.20, Mn ≤ 1.7, Si ≤ 0.55, P ≤ 0.040, S ≤ 0.040, V 0.02 ~ 0.15. The difference between Q345B steel and Q345A steel is mainly in A and B behind the steel grade, Q345A steel grade is not subject to impact; Q345B steel grade needs 20 ℃ room temperature impact test.
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
Leave a Message