The demand for EN 10025-6 high strength steel

27SiMn steel plate has high strength and wear resistance, high hardenability, good machinability, moderate cold deformation plasticity and weldability. In addition, the toughness of 27SiMn steel does not decrease much during heat treatment, but it has quite high strength and wear resistance, especially when water quenching still has high toughness; but this steel is highly sensitive to white spots and has temper brittleness during heat treatment. Tendency and sensitivity to overheating.

BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of EN 10025-6 high strength steel steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main EN 10025-6 high strength steel production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.

Both the cross rolling method and the extrusion method must first heat the tube blank or ingot, and the steel tube produced is called hot rolling tube. Steel pipes produced by hot working can sometimes be cold worked as required. There are two methods of cold working: one is cold drawing, that is, drawing the EN 10025-6 high strength steel steel pipe through the drawing die to make the steel pipe gradually thin and elongate; the other is cold rolling, which is the method of applying the hot rolling mill invented by the menesmann brothers to cold working. The cold working of EN 10025-6 high strength steel seamless steel pipe can improve the size accuracy and finish of steel pipe, and improve the mechanical properties of materials.

The EN 10025-6 high strength steel, wear resistant steel plate is composed of low carbon steel plate and alloy wear-resistant layer, and the alloy wear-resistant layer is 1/3 ~ 1/2 of the total thickness. The alloy wear-resistant layer and the base plate are metallurgically bonded. When working, the base plate provides comprehensive properties such as strength, toughness and plasticity to resist external forces, and the alloy wear-resistant layer provides wear-resistant properties to meet the requirements of specified working conditions.

The company has passed the ISO9001: 2008 quality system certification, strictly implemented the ISO9001 quality management system. Besides, we have continuously improved the after-sales service network to make every effort to provide more convenient, accurate and faster services for all customers. We will supervise the production, control the quality in the factory, Inspect the cargo before shipment, Issue the test report to sales department. From the steel prodcution to steel delivery, we always focus the whole process.