The manufacturing process and normalizing technology of S550 steel specification

The company has sufficient inventory and complete varieties and specifications. In line with the sales principle of low price operation and quality first, let customers buy S550 steel specification at ease and use it comfortably! Integrity, professionalism and efficiency are our service tenets. We will wholeheartedly provide excellent S550 steel specification products and high-quality services for new and old customers. We also sincerely welcome new and old customers to call and write to discuss business and guide work!

Our company can produce S550 steel specification, EN10025-2 S355J2 structural steel plates and sheets up to 400mm thickness. S355J2 steel consists of S ( for structural steel), 355 (indicates the minimum specified yield strength value in MPa for thickness less than 16mm), J2( for a minimum impact energy value of 27J at -20ºC). EN S355J2 structural steel plates are suitable for cold flanging, delivery condition normalized rolled or as rolled.

Low-alloy high-strength steel grades are designed to have quite good notch toughness for their intended structural use. The applicability of the notch toughness of specific grades of low-alloy high-strength steel is either based on existing use experience or combined with the results of the impact test of notched specimens. In order to meet the very strict requirements of certain applications, some S550 steel specification, low-alloy high-strength steels produced have excellent notch toughness. For example, controlled hot rolling technology is usually used to produce low-alloy high-strength steel plates for the manufacture of welded line pipes. Such steel pipes need to meet the requirements of relevant standards for notch toughness.

Ultrasonic flaw detection emits ultrasonic waves to the S550 steel specification steel plate under inspection. If there are defects in the steel plate, the ultrasonic waves will reflect, refract or deform waveforms due to the defects. By recording these changes, the type and shape of the defects are analyzed. Due to its high energy and good penetration performance, and the smoothness of the S550 steel specification steel plate itself, ultrasound is often used to detect defects such as inclusions, shrinkage holes, bubbles, and cracks in the steel plate.

S550 steel specification, SA387Gr11CL2 steel chemical composition(%): C: ≤0.15, Si: 0.44—0.86, Mn: 0.35—0.73, P: ≤0.10, S: ≤0.007, Cr: 0.94—1.56, Mo: 0.40—0.70, Ni: ≤0.25, Cu: ≤0.20, Sb: ≤0.0030, Sn: ≤0.015, As: ≤0.016.SA387Gr11CL2 steel mechanical properties: Tensile strength, ksi [MPa]: 75 to 100 [515 to 690]; Yield strength, min, ksi [MPa]: 43 [310]Elongation in 8 in. [200mm], min %: 18; Elongation in 2 in. [50mm], min, %: 22

Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.