The strict quality control of EN 10025-6 S890QL high strength steel processing

S45C steel plate chemical composition: C 0.42~0.48, Si 0.15~0.35, Mn 0.60~0.90, P≤0.030, S≤0.035, Cu≤0.30, Ni≤0.20, Cr≤0.20
Mechanical properties of EN 10025-6 S890QL high strength steel product
Tensile strength>686MPa
Yield strength>490MPa
Elongation δ5>17%
Shrinkage ψ>45%
Impact toughness value>78J/cm2
The hardness is 201~269HB.

The boiler steel is not only required to have good corrosion resistance at low temperature, but also required to have good oxidation resistance at high temperature for components working at high temperature. Especially for the components of superheater and reheater, when they EN 10025-6 S890QL high strength steel work at high temperature, they are required not easy to be oxidized and peeled. Generally, the development speed of oxidation depth at working temperature is required to be less than 0.1mm/year. The addition of chromium, nickel, aluminum and silicon can improve the oxidation resistance of steel.

In the production process of the ironmaking process, the moisture content and air temperature of the ironmaking blast furnace blast have a direct impact on the fuel consumption and fuel consumption structure of the ironmaking process. Blast furnace blast dehumidification is to remove the moisture in the blast furnace blast, eliminate the adverse effects of atmospheric humidity fluctuations on the blast furnace forward movement, and create stable operating conditions for the fans.

Since its establishment, the company has participated in several key railway and highway projects. After years of development, the company’s EN 10025-6 S890QL high strength steel domestic market has been exported to more than a dozen provinces and cities including Kunming, Shenzhen, Hunan, Sichuan, Shanghai, Nanjing, Heihe, Jilin, Inner Mongolia, and Xinjiang . International trade is exported to Kazakhstan, South Korea, Vietnam, South Africa and many other countries, and has been well received by customers.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel EN 10025-6 S890QL high strength steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.