What is the 15mm S690QL alloy steel plate impact test

The company specializes in the research and development, production and sales of 15mm S690QL alloy steel plate seamless pipes, longitudinally welded pipes, large-diameter welded pipes, API 5L welded pipes, spiral welded pipes, and large-diameter thick-walled straight seam steel pipes. The company has 15mm S690QL alloy steel plate five production lines in three major production workshops: large-diameter longitudinally welded pipe production workshop,15mm S690QL alloy steel plate rolled steel pipe production workshop, and thermally expanded steel pipe production workshop, with an annual production capacity of more than 100,000 tons.

S50C steel characteristics: the carbon content of the steel (mass fraction, %) ≥ 0.4, excellent wear resistance, reduced ductility, easy to deform and crack after quenching, so quenching is extremely important, and it must be quenched after cutting and tempering to avoid tempering brittleness. By implementing spheroidizing treatment, the cutting performance of this type of carbon steel keyword} can be improved. The steel is usually used after tempering to a hardness of 19~22HRC to increase its cutting performance.

The most remarkable characteristic of low alloy high strength steel is high strength. In hot rolling or normalizing state, the strength of low alloy high strength steel is generally 30% - 50% higher than that of corresponding carbon engineering structural steel, 15mm S690QL alloy steel plate. Therefore, it can bear large load. Engineering structures are usually large or huge, and the weight of the component itself often becomes an important part of the load. When the strength of the structural material is improved, the self weight of the component can be significantly reduced, and its ability to bear other loads can be further improved.

Oxygen is a harmful element in 15mm S690QL alloy steel plate steel. With the increase of oxygen content, the strength of 15mm S690QL alloy steel plate steel increased, but the plasticity, especially the toughness, decreased significantly, and the weldability became worse. The presence of oxygen causes hot brittleness of 15mm S690QL alloy steel plate steel.

Chemical elements of 35CrMnSi steel: C: 0.32-0.39, Si: 1.10-1.40, Mn: 0.80-1.10, Cr: 1.10-1.40. The mechanical properties of 35CrMnSi steel: tensile strength 1620 MPa; yield strength 1280 MPa; elongation after fracture: 9%; reduction of area: 40; impact energy: 31J. 15mm S690QL alloy steel plate, 35CrMnSi steel is used to manufacture medium speed, heavy load, high strength parts and high strength components, such as aircraft landing gear and high pressure blower blades. 35CrMnSi can partly replace the corresponding CrNi alloy steel in manufacturing small and medium section parts.

The company has a high-quality management, technology and R&D team, and adopts independent research and development, domestic innovative process optimization combination. Relying on advanced manufacturing technology and sophisticated production testing equipment, it has ensured the high quality of products 15mm S690QL alloy steel plate and won a good reputation. We can offer various kinds of steel materials in GB, ASME, ASTM, JIS, DIN, EN, API standards and specifications.

The company has passed the ISO9001: 2008 quality system certification, strictly implemented the ISO9001 quality management system. Besides, we have continuously improved the after-sales service network to make every effort to provide more convenient, accurate and faster services for all customers. We will supervise the production, control the quality in the factory, Inspect the cargo before shipment, Issue the test report to sales department. From the steel prodcution to steel delivery, we always focus the whole process.